Power Nailer Info Page

The KRDTI7000 Power Nailer is Typically Configured to Apply a

7/16" Diameter Domed Decorative Upholstery Nail Head with a 1/2" or 5/8" Shank Length

 

To configure any other nail head size for the KRDTI7000 Power Nailer to work with your specifications

We will need the following

  •  Decorative nail you intend to shoot , Approx 50 samples will be needed of each size.

  • The Fabric & or Material you intend to use in your application.

  • Sample of the wood to be used .

These items should be mailed to the address below

 King Richard Co.
15 Union St
Lawrence, Ma 01840

Along with any additional information you feel would be important.

We can then configure the Power Nailer to work properly in your specific application.

Back to KRDTI7000 Power Nailer