|
Novasuede
passes the following flammability tests without additional FR
treatment. |
|
Cal 11E |
Pass:
|
|
UFAC/NFPA260 |
Class 1:
|
|
ASTM E84 |
(Glue down
method) Class A: Novasuede, Novasuede/sheeting |
To meet other flammability specifications, it may be necessary
to apply a flame retardant (FR) treatment to the Novasuede or
Nytek.
Novasuede can
treated to meet the following standards. The specific FR
treatment may vary according to the standard requested. Please
be specific as to which standard is required for individual
orders.
|
|
BS 282,
Part 1 (Nord Arch) |
Novasuede,
Novasuede on 1/8" foam tricot |
I.M.O. 652
(16),
Sections 8.2 and 8.3 |
Novasuede,
Novasuede/knit, Novasuede/sheeting |
|
I.M.O. 653 |
Novasuede
(minimums apply) |
B.S. 5852,
Part 1,
Ignition
sources #0 and #1
|
Novasuede,
Novasuede/knit, Novasuede/sheeting |
B.S. 5852,
Part 2,
Ignition source #5 (crib 5) |
Novasuede,
Novasuede/knit, Novasuede/sheeting |
|
BS 46,
Part |
Novasuede/sheeting |
|
Lloyd’s
Certificate |
"Material
Having Low Flame Spread Characteristics" (based on BS 46, part
): Novasuede, Novasuede/sheeting |
|
Lloyd’s
Certificate |
"Material
Having Low Flame Spread Characteristics and Not Capable of
Producing Excessive Quantities of Smoke and Toxic Products of
Combustion" (based on IMO Test Procedures Code, Annex 1, Part 5
and Part 2) |
FAR 25.853
(a)
Appendix F Part I (a)(1)(ii) |
(12 second
vertical burn) |
|
MVSS302 |
|
|
Testing
has been done on representative lots of flame retardant-treated
Novasuede and Nytek by the methods listed above at independent
laboratories. The test reports are on file and available upon
request. New orders are manufactured by the same methods as the
tested materials and are quality controlled. Unless otherwise
requested in writing from the customer, the above listed tests
are not performed and certified on individual orders. |
