Boat Top Hardware - Struts, Hinges, Sleeves, Slide-Slit Mounts And More From Gemini Marine

Stainless Hinges

Investment cast in 316 with a 316 stainless link. Solid body construction with two Buna

O-rings to compensate for tubing wall

thickness variation. Relief areas are

provided for attachment to tubing via either

roll pins or set screws.

1” OD stainless tubing -

.065” wall thickness. $ 28.50 Ea. Item # 1SSH

7/8” OD stainless tubing -

.065” wall thickness. $ 27.50 Ea. Item # 78SSH

Hinge Kits

(Main Pipe Pc's Not Included)

Hinge kits are designed for fabricating shops with an existing tubing supply

Hinge Kit Assembly Instructions

Helpful Tips

The essential components for building your own struts. Each kit provides two hinges, two sleeves, four spring balls and four roll pins. Available with

plastic or stainless hinges, both in either 7/8” or 1” tubing sizes.

The strut tubing, eye ends and other attachment hardware are also available.
Stainless Hinge Kits

For 1"Tubing:$109.00 Ea.

With 2 10"X1-1/8"Sleeves-Item #110SSHK

For 1"Tubing:$99.00 Ea.

With 2 5"X1-1/8"Sleeves-Item #15SSHK

------------------------------------

For 7/8"Tubing:$99.00 Ea.

With 2 10"x1"Sleeves-Item #7810SSHK

For 7/8"Tubing:$89.00 Ea.

With 2 5"X1"Sleeves-Item #785SSHK

Sleeves

Type 304 stainless sleeve tubing, cut &

de burred in 5” and 10” lengths.

.049” wall thickness. Available in

1” OD and

1 1/8” OD.

1-1/8”x10” $10.75 Ea. Item #11810S

1-1/8”x 5” $7.50 Ea. Item #1185S

1”x10” $10.25 Ea. Item #110S

1”x 5” $7.00 Ea. Item #15S

316 Spring balls $2.00 Ea. Item #316SB

Assembled Struts

( Includes Hinge, Sleeve & 2 Pipe Pc's Slide/Side Mounts & End Caps Purchased Separately )

Strapless Bimini Conversion Kit-Click For Info

Prefabricated folding struts – available only

for stainless hinges at this time.

Stainless hinges are secured in stainless tubing using stainless roll-pins. An oversized sleeve member slides over the hinge area/joint and is locked in place using two spring ball end-stops. This creates a secure joint which cannot be accidentally dislodged and which is fully load bearing. Struts are available for both 7/8” and 1” tubing/hinges. Both sizes come in two standard lengths – 36” and 72”. Sold in pairs. Installer cuts tubing down to finished length. Installation instructions available in paper and digital formats.

1" x 6': $79.00 Ea. Item #16AS

7/8" x 6': $75.00 Ea. Item # 786AS
1" x 3': $75.00 Ea. Item # 13AS

7/8" x 3': $70.00 Ea. Item # 783AS

Sliding Side / Split Mount / End Caps

Outside Eye Ends

Click Image For More Info

Drill Steady

Click Image For More Info