DentKing.ComBack To DentKing.Com Main Page / Click To Order
 |
Advanced Set Item#: PAT2 This set of ancillary tools is perfect for the technician who wants it all up front. Comes with hammer, punches, wedge, window guard, door jammer, tie straps, plugs, clip remover, awl, brace cutter, magnetic screwdriver set, hole saw cutter kit, flex-light, hood props, roof strap, sand paper, door handle remover, s-hooks and tool box. $ 303.00 |
| Click To Order | |
 |
Sanding Block Item#s: UG1500 & UG2000 Repairs small imperfections in the paint $ 22.00 |
| Click To Order | |
 |
Light Finish Hammer Item#: LT160 For use with punches knocking down high spots. 8 oz. $ 22.94 |
| Click To Order | |
 |
Ball Peen Hammer Item#: BP708 For use with punches and making practice dents. 8 oz. $ 9.95 |
| Click To Order | |
 |
Wood Mallet Item#: MALLET For use with punches for even strikes $ 9.95 |
| Click To Order | |
 |
Magnetic Tray Item#: MT1 Save trim screws and washers from becoming lost. $ 11.95 |
| Click To Order | |
 |
1" Punch Set Item#: PS1001 Used to knock down high spots. Large head is good for making practice dents. Set of Two $ 9.95 |
| Click To Order | |
 |
1/2" Punch Set Item#: PS1002 Used to knock down high spots, while minimizing the risk of marring the surface. Set of Two $ 9.95 |
| Click To Order | |
 |
1" & 1/2" Punch Set Item#: PS1004 All four sizes of punches. One great price. $ 18.95 |
| Click To Order | |
 |
Hole Saw Cutter Kit Item#: 11090 Creates clean access holes. Contains starter awl, arbor, pilots, wrench, stop and seven cutters, 5/16 to 3/4. $ 72.80 |
| Click To Order | |
 |
Uni-Bit 1/4-3/4 Drill Bit
Item#: PU3 Drills up to 9 different hole sizes. $ 34.95 |
| Click To Order | |
 |
Small Drill Stop Item#: DS1501 For use with conventional drill bits $ 4.20 |
| Click To Order | |
 |
Large Drill Stop Item#: DS1502 For use with conventional drill bits $ 6.00 |
| Click To Order | |
 |
Scratch Awl Item#: AWL Starts pilot holes before drilling. $ 5.24 |
| Click To Order | |
 |
S-Hooks & O-Rings Item#: SHOOKS Used for leverage points on open panels. $ 5.95 |
| Click To Order | |
 |
Roof Strap Item#: PRS Fits between the roof and door frame to create a leverage point when working on the roof. $ 15.95 |
| Click To Order | |
 |
Hood Prop Item#: HP459 Telescopes to hold hood and deck lids open for a stable working surface. $ 25.00 |
| Click To Order | |
 |
Hollow Window Wedge Item#: WEDGE1 You won't find this Wedge in just any catalog. This one-of-a-kind wedge allows you to slide a half-inch tool or smaller down the center while protecting the glass from any unwanted damage. Works well with Flat Bars, too! Patent pending. $ 29.08 |
| Click To Order | |
 |
Large Window Wedge Item#: WEDGE2 Large Plastic Wedge for easy access down the door window. $ 10.75 |
| Click To Order | |
 |
Thin Window Wedge Item#: WEDGE3 Thin Plastic Wedge used for window work. $ 9.60 |
| Click To Order | |
 |
Clip Remover Item#: DU354 Save clips and panels with this clip removal tool. Works well with troubling fasteners, clips and retainers. $ 9.75 |
| Click To Order | |
 |
Trim Tool Item#: 7999 GM designed, fastener remover works on several models of cars. $ 8.58 |
| Click To Order | |
 |
Inventure Door Jammer Item#: PJAM Secures door while you work. Adjustable pulley tightens with ease. $ 35.00 |
| Click To Order | |
 |
Steck Door Jammer Item#: DJ1700 Holds door steady while you work. Designed for any latch. $ 25.95 |
| Click To Order | |
 |
LEXON Window Guard Item#: WG1 Thin durable sheet of molded LEXON for scratch protection when working down the window. $ 14.95 |
| Click To Order | |
 |
STAINLESS Window Guard
Item#: WG2 Designed to protect the glass when working down the window sill on the door. Made from thin flexible stainless steel. $ 18.95 |
| Click To Order | |
 |
12" Brace Cutter Item#: S28412 Cuts glue between panel and braces to gain access to dents above glue spots. $ 18.50 |
| Click To Order | |
 |
10" Brace Cutter Item#: S28410 Cuts glue between panel and braces to gain access to dents above glue spots. $ 17.00 |
| Click To Order | |
 |
Flexible Flash Light Item#: FL250 Small and flexible. Used to see behind panels or down windows to look for braces. $ 15.85 |
| Click To Order | |
 |
Hemflange Tool Item#: VISE 1 $ 50.00 |
| Click To Order | |
 |
Spoon Item#: SPOON $ 40.00 |
| Click To Order | |
 |
Hail Strap Item#: HAILST This fully Adjustable Strap allows for secure tool leverage on any panel. Use it on hoods, deck lids, roofs, inside trunks or wheel wells. Saves on damage from S-Hooks and makes them a thing of the past. $ 59.95 |
| Click To Order | |
 |
Steel Bore Punches Item#: PUNCH These weighted punches allow for even, scratchproof strikes for knocking down high spots. $ 7.00 |
| Click To Order | |
 |
Rust Preventative Item#: NORUST Worried about E-Coat removal? Make sure by re-applying a coat of Rust Preventative behind your work. Laboratory tested and insurance approved. $ 10.00 |
| Click To Order | |
 |
Air Wedge Item#: WEDGE 4 By far the best Wedge ever made for paintless dent removal. Safe on glass and moldings, it's as simply as inserting the bag and then using the pump to inflate the bag to the proper separation. When you're done, simply press the release valve and pull the wedge out. Affordable and practical - but, best of all, completely safe. $ 25.00 |
| Click To Order | |
 |
Starter Set Item#: PAT1 The perfect beginners set of ancillary tools. Comes with ball peen hammer, wedge, window guard, s-hooks, tie straps, hood props, door jammer, clip remover, brace cutter and punch set. $ 160.00 |
| Click To Order | |
 |
Metal Knock Down This unique metal knock down set is excellent for the more experienced technician. The precision milled heads with high gloss polish displace metal more efficiently than any Nylon Knock down. Excellent for working larger dents. The kit comes complete with one wide head, one mid-range head and one smaller (cherry bomb style) head. Rubber caps and a carrying case included. Item # PS100M $ 58.00 |
| Click To Order |