|
#2 Button Machine Instructions From UpholsterySupplies.Com Part of King Richard Co. |
|
The information and photo's contained in these instructions are the property of King Richard Co. and may not be reproduced in any manner with out the expressed written permission of King Richard Co. |
|
Step -1 Place Bottom shell with Wire in Right Die |
|
Properly placed Bottom Shell with Wire Eye |
|
Step - 2 Slide Die Set to the Right so that the right die is under top die |
|
Top Die properly lined up with bottom die |
|
Step - 3 Place Top Shell in Left Die |
|
Properly placed Top Shell |
|
Step - 4 Place Fabric on top of Top Shell so that edges are down inside outer die ridge |
|
Properly place fabric |
|
Step - 5 Swing Die Set so that the Left die with Top Shell & Fabric Are under Top Die |
|
Properly Placed Left & Top Dies |
|
Step - 6 Pull Handle This will load the Top Shell & Fabric Into The Top Die |
|
Step - 7 Swing Die Set To Right so that the Bottom Shell Die is under Top Die |
|
Properly lined up top And Right Die |
|
Step - 8 Pull Handle to Bring Top shell & Fabric down to Bottom Right Die. This action will crimp the Top Shell & Fabric to The Bottom Wire Eye Shell |
|
To Release the Button Slide the Lower part of the Top Dies Upwards. this will pop the button out |
|
Pull the Button Out |
|
Your Button Has Been Completed! With Practice this procedure will become faster & faster
|
|
The information and photo's contained in these instructions are the property of King Richard Co. Inc and may not be reproduced in any manner with out the expressed written permission of King Richard Co. Inc |
Back To Button Making Supplies